1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
|
/*
* SOC/PCB Temperature driver for Nintendo Switch's TI TMP451
*
* Copyright (c) 2018-2020 CTCaer
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <soc/hw_init.h>
#include <soc/i2c.h>
#include <soc/t210.h>
#include <thermal/tmp451.h>
u16 tmp451_get_soc_temp(bool intenger)
{
u8 val;
u16 temp = 0;
val = i2c_recv_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TEMP_REG);
if (intenger)
return val;
temp = val << 8;
val = i2c_recv_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_DEC_REG);
temp |= ((val >> 4) * 625) / 100;
return temp;
}
u16 tmp451_get_pcb_temp(bool intenger)
{
u8 val;
u16 temp = 0;
val = i2c_recv_byte(I2C_1, TMP451_I2C_ADDR, TMP451_PCB_TEMP_REG);
if (intenger)
return val;
temp = val << 8;
val = i2c_recv_byte(I2C_1, TMP451_I2C_ADDR, TMP451_PCB_TMP_DEC_REG);
temp |= ((val >> 4) * 625) / 100;
return temp;
}
void tmp451_init()
{
// Disable ALARM and Range to 0 - 127 oC.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CONFIG_REG, 0x80);
// Set remote sensor offsets based on SoC.
if (hw_get_chip_id() == GP_HIDREV_MAJOR_T210)
{
// Set offset to 0 oC for Erista.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFH_REG, 0);
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFL_REG, 0);
}
else
{
// Set offset to -12.5 oC for Mariko.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFH_REG, 0xF3); // - 13 oC.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_SOC_TMP_OFL_REG, 0x80); // + 0.5 oC.
}
// Set conversion rate to 32/s and make a read to update the reg.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CNV_RATE_REG, 9);
tmp451_get_soc_temp(false);
// Set rate to every 4 seconds.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CNV_RATE_REG, 2);
}
void tmp451_end()
{
// Place into shutdown mode to conserve power.
i2c_send_byte(I2C_1, TMP451_I2C_ADDR, TMP451_CONFIG_REG, 0xC0);
}
|